 |
| | CAP0400 Compact Active Pole, 400 mm (15.8 in) | The CAP0400 is a 400 mm active microphone pole with a short gooseneck, which allows the microphone to be adjusted up to 90°. It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053.
The CAP0400 has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48. A strong rubber coating gives the pole a dark gray non-reflective surface specially designed for the, from time to time, rough life in TV-studios and OB-vans.
This active microphone pole is intended for usage in table stand applications especially together with the TSM4000 Table Shock Mount. |
|
|
 |
| | CAP0750 Compact Active Pole, 750 mm (2.5 ft) | The CAP0750 is a 750 mm active microphone pole with a short gooseneck, which allows the microphone to be adjusted up to 90°. It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053. It has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48. A strong rubber coating gives the pole a dark gray non-reflective surface specially designed for the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
The CAP0750 has it's place among the components in DPA's elegant Flamingo Series of Floor and Table Stands and is a standard part of the short single floor stand FJS4000 Flamingo Junior. |
|
|
 |
| | CAP1250 Compact Active Pole, 1250 mm (4.1 ft) | The CAP1250 is a 1250 mm active microphone pole with a short gooseneck, which allows the microphone to be adjusted up to 90°. It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053.
It has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48. A strong rubber coating gives the pole a dark gray non-reflective surface specially designed for the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
The CAP1250 has it's place among the components in DPA's elegant Flamingo Series of Floor and Table Stands and is a standard part of the single floor stand FGS4000 Flamingo Grand, plus the double floor stand FGT4000 Flamingo Grand Twin. |
|
|
 |
| | DUA0100 Stand Extension, 100 mm (3.94 in) | The DUA0100 is a 100mm Stand Extension with a non-reflective black anodized surface. It is an important component in the elegant and flexible Flamingo Series of floor stands, because it is specially designed to allow the Compact Active Poles CAP0750 and CAP1250 to be used on standard microphone stands in applications where additional stand height is needed.
The DUA0100 is supplied as standard with the FGS4000, FGT4000 and FJS4000 Flamingo Floor Stands. |
|
|
 |
| | DUA0250 Floor Base, Ø250 mm (9.8 in) | The DUA0250 is a Ø 250 mm Floor Base with a strong powder painted matte black surface. It has three rubber feet which ensures a stable placement of the microphone stand at any time on any surface. The Floor Base is designed so that several DUA0250s can be stacked on top of each other to save space when not in use.
The DUA0250 Floor Base is an important component in the elegant and flexible Flamingo Series of floor stands and is supplied as standard with the FGS4000, FGT4000 and FJS4000 Flamingo Floor Stands. |
|
|
 |
| | DUA0500 Stand Extension, 500 mm (19.7 in) | The DUA0500 is a 500 mm Stand Extension with a non-reflective black anodized surface.
It is an important component in the elegant and flexible Flamingo Series and is supplied as standard with the FGS4000, FGT4000 and FJS4000 Flamingo Floor Stands. |
|
|
 |
| | FGS4000 Flamingo Grand, Single Pole | The FGS4000 is a complete active microphone floor stand solution in the Flamingo Series. The floor stand has an elegant and exclusive design with a black non-reflective surface specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053. The Compact Active Pole CAP1250 supplied with the FGS4000 has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48.
The FGS4000 Floor Stand is delivered in a handy and rugged plastic tube with a special foam insert to fit all the different parts in the microphone stand - a perfect storage item which offer maximum protection at minimum space during transport, or when the stand is not in use. |
|
|
 |
| | FGT4000 Flamingo Grand Twin, Double Pole | The FGT4000 is a complete active dual microphone floor stand solution in the Flamingo Series for situations where a back-up audio line is requested. The dual floor stand has an elegant and exclusive design with a black non-reflective surface specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls. The Compact Active Poles in supplied with the FGT4000 are fitted with female Lemo-connectors for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053. At the rear of the poles a standard 3-pin XLR allows phantom power P48 to be used directly. The FGS4000 Floor Stand is furthermore delivered in a handy and rugged plastic tube with a special foam insert to fit all the different parts in the microphone stand - a perfect storage item which offer maximum protection at minimum space during transport, or when the stand is not in use. |
|
|
 |
| | FJS4000 Flamingo Junior Short, Single Pole | The FJS4000 is a complete active short microphone floor stand solution in the Flamingo Series. The floor stand has an elegant and exclusive design with a black non-reflective surface specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4028 and 4053. The Compact Active Pole CAP0750 supplied with the FJS4000 has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48.
The FJS4000 Floor Stand is delivered in a handy and rugged plastic tube with a special foam insert to fit all the different parts in the microphone stand - a perfect storage item which offer maximum protection at minimum space during transport, or when the stand is not in use. |
|
|
 |
| | SJD4000 Swivel Joint, Double | The SJD4000 is a double swivel joint for mounting two Compact Active Poles in the Flamingo Series Floor Stands on one stand extension.
The swivel joint allows the microphone stands to be adjusted in height and position while still holding the active poles firmly. It is an important component in the elegant and flexible Flamingo Series and is supplied as standard with the FGT4000 Flamingo Grand Twin floor stands. |
|
|
 |
| | SJS4000 Swivel Joint, Single | The SJS4000 is a single swivel joint for mounting the Compact Active Poles in the Flamingo Series Floor Stands on to the stand extension.
The swivel joint allows the microphone stand to be adjusted in height and position while still holding the active pole firmly. It is an important component in the elegant and flexible Flamingo Series and is supplied as standard with the FGS4000 and FJS4000 Flamingo Floor Stands. |
|
|
 |
| | TB4000 Table Base | The Table Base TB4000 is a beautifully designed base for use with most microphone holders with a 3/8-inch thread.
It has a black non-reflective surface and is optimized for use with Compact Shock Mount CSM4000, resulting in a table microphone solution, that is not affected by low frequency transmission through the table. |
|
|
Stands
The CAP0400 is a 400 mm active microphone pole with a short gooseneck, which allows the microphone to be adjusted up to 90°. It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053.
The CAP0400 has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48. A strong rubber coating gives the pole a dark gray non-reflective surface specially designed for the, from time to time, rough life in TV-studios and OB-vans.
This active microphone pole is intended for usage in table stand applications especially together with the TSM4000 Table Shock Mount.
The CAP0750 is a 750 mm active microphone pole with a short gooseneck, which allows the microphone to be adjusted up to 90°. It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053. It has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48. A strong rubber coating gives the pole a dark gray non-reflective surface specially designed for the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
The CAP0750 has it's place among the components in DPA's elegant Flamingo Series of Floor and Table Stands and is a standard part of the short single floor stand FJS4000 Flamingo Junior.
The CAP1250 is a 1250 mm active microphone pole with a short gooseneck, which allows the microphone to be adjusted up to 90°. It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053.
It has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48. A strong rubber coating gives the pole a dark gray non-reflective surface specially designed for the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
The CAP1250 has it's place among the components in DPA's elegant Flamingo Series of Floor and Table Stands and is a standard part of the single floor stand FGS4000 Flamingo Grand, plus the double floor stand FGT4000 Flamingo Grand Twin.
The DUA0100 is a 100mm Stand Extension with a non-reflective black anodized surface. It is an important component in the elegant and flexible Flamingo Series of floor stands, because it is specially designed to allow the Compact Active Poles CAP0750 and CAP1250 to be used on standard microphone stands in applications where additional stand height is needed.
The DUA0100 is supplied as standard with the FGS4000, FGT4000 and FJS4000 Flamingo Floor Stands.
The DUA0250 is a Ø 250 mm Floor Base with a strong powder painted matte black surface. It has three rubber feet which ensures a stable placement of the microphone stand at any time on any surface. The Floor Base is designed so that several DUA0250s can be stacked on top of each other to save space when not in use.
The DUA0250 Floor Base is an important component in the elegant and flexible Flamingo Series of floor stands and is supplied as standard with the FGS4000, FGT4000 and FJS4000 Flamingo Floor Stands.
The DUA0500 is a 500 mm Stand Extension with a non-reflective black anodized surface.
It is an important component in the elegant and flexible Flamingo Series and is supplied as standard with the FGS4000, FGT4000 and FJS4000 Flamingo Floor Stands.
The FGS4000 is a complete active microphone floor stand solution in the Flamingo Series. The floor stand has an elegant and exclusive design with a black non-reflective surface specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053. The Compact Active Pole CAP1250 supplied with the FGS4000 has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48.
The FGS4000 Floor Stand is delivered in a handy and rugged plastic tube with a special foam insert to fit all the different parts in the microphone stand - a perfect storage item which offer maximum protection at minimum space during transport, or when the stand is not in use.
The FGT4000 is a complete active dual microphone floor stand solution in the Flamingo Series for situations where a back-up audio line is requested. The dual floor stand has an elegant and exclusive design with a black non-reflective surface specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls. The Compact Active Poles in supplied with the FGT4000 are fitted with female Lemo-connectors for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4033 and 4053. At the rear of the poles a standard 3-pin XLR allows phantom power P48 to be used directly. The FGS4000 Floor Stand is furthermore delivered in a handy and rugged plastic tube with a special foam insert to fit all the different parts in the microphone stand - a perfect storage item which offer maximum protection at minimum space during transport, or when the stand is not in use.
The FJS4000 is a complete active short microphone floor stand solution in the Flamingo Series. The floor stand has an elegant and exclusive design with a black non-reflective surface specially made to handle the, from time to time, rough life in TV-studios, OB-vans and on stage in theaters and concert halls.
It is fitted with a female Lemo-connector for quick and safe connection of microphones and accommodates the Compact Microphones Types 4023, 4028 and 4053. The Compact Active Pole CAP0750 supplied with the FJS4000 has a standard 3-pole XLR at the rear of the pole and can be used directly on phantom power P48.
The FJS4000 Floor Stand is delivered in a handy and rugged plastic tube with a special foam insert to fit all the different parts in the microphone stand - a perfect storage item which offer maximum protection at minimum space during transport, or when the stand is not in use.
The SJD4000 is a double swivel joint for mounting two Compact Active Poles in the Flamingo Series Floor Stands on one stand extension.
The swivel joint allows the microphone stands to be adjusted in height and position while still holding the active poles firmly. It is an important component in the elegant and flexible Flamingo Series and is supplied as standard with the FGT4000 Flamingo Grand Twin floor stands.
The SJS4000 is a single swivel joint for mounting the Compact Active Poles in the Flamingo Series Floor Stands on to the stand extension.
The swivel joint allows the microphone stand to be adjusted in height and position while still holding the active pole firmly. It is an important component in the elegant and flexible Flamingo Series and is supplied as standard with the FGS4000 and FJS4000 Flamingo Floor Stands.
The Table Base TB4000 is a beautifully designed base for use with most microphone holders with a 3/8-inch thread.
It has a black non-reflective surface and is optimized for use with Compact Shock Mount CSM4000, resulting in a table microphone solution, that is not affected by low frequency transmission through the table.