악세서리Holders and Suspension

Holders and Suspension



 BC4099 Clip for Bass and more

Clip til Bas m.m.



 BLM6000-B Boundary Layer Mount, Black

The BLM6000-B is a unique accessory tool that enhances the versatility of your DPA miniature microphone. It is a soft piece of durable rubber with a diameter of 75 mm. It has an underside cavity for mounting a DPA 4060, 4061, 4062 or 4063 microphone.

When placing a microphone on a reflective boundary, you will benefit from the special characteristics of the sound field found here - a 6 dB gain of direct sound and just 3 dB gain of the diffuse sound. This means that the sound captured from this so-called "pressure zone" has higher sensitivity, clarity, and intelligibility compared to the sound captured from the "free air" and serves neatly as a kind of acoustical zoom.

The BLM6000-B can be mounted on all surfaces that reflect sound such as floors, walls or ceilings. Placing a DPA miniature microphone in this little device on the inside lid of an open grand piano also provides a very distinct and crispy sound.



 BLM6000-W Boundary Layer Mount, White

The BLM6000-W is a unique accessory tool that enhances the versatility of your DPA miniature microphone. It is a soft piece of durable rubber with a diameter of 75 mm. It has an underside cavity for mounting a DPA 4060, 4061, 4062 or 4063 microphone.

When placing a microphone on a reflective boundary, you will benefit from the special characteristics of the sound field found here - a 6 dB gain of direct sound and just 3 dB gain of the diffuse sound. This means that the sound captured from this so-called "pressure zone" has higher sensitivity, clarity, and intelligibility compared to the sound captured from the "free air" and serves neatly as a kind of acoustical zoom.

The BLM6000-W can be mounted on all surfaces that reflect sound such as floors, walls or ceilings. Placing a DPA miniature microphone in this little device on the inside lid of an open grand piano also provides a very distinct and crispy sound.



 CC4099 Clip for Cello and more

Clip for Cello and more



 CH4000 Microphone Holder for Cello

The CH4000 is specially designed for mounting the studio quality Compact Microphones directly on the cello and bringing the microphone directly to the sweet spot of the instrument in a quick and straight forward way.

It clips over the strings behind the bridge of the cello and has multiple adjustment possibilities for the optimal microphone placement. The CH4000 offers an effective rubber suspension of the microphone.



 CSM4000 Compact Shock Mount
The CSM4000 alias "The Radiator Mascot" is a shock mount specially designed for rubber suspension of Compact Microphones on standard microphone stands, the TB4000 Table Base or the MB4000 Magnet Base.

The recommended extra soft Rubber Mounts provides an efficient absorption of any vibrations, that might occur during use. It is fitted with one DDS0019 Rubber Mount for Ø 19 mm microphones as standard, but can also be fitted with Rubber Mounts for both Ø 11-13 mm and Ø 16 mm microphones. The robust plastic ring offers excellent protection of the microphone, if used for example on a drum kit.

The CSM4000 is fitted with a thread adapter, which allows usage on up to three of the most popular international standard threads used on microphone stands.


 CXO4000 Compact XY/ORTF Stereo Holder
Adapter for use with DPA's series of Miniature Microphones.


 CXY4000 Compact XY Stereo Holder

The EXY4000 Extension is intended for usage together with Compact stereo holders (i.e. CXY4000) if rubber suspension is needed.

It has a 19 mm outside diameter and will fit directly into the UA0897 Shock Mount, the RSM4000 Shock Mount for Windjammer or the WSM4000 WINDPAC Shock Mount.




 DC4099 Clip for Drum

Clip for drum.



 DDS0012 Rubber Mount 11-13 mm (0.47 in), Extra Soft
The DDS0012 Rubber Mount is molded from a single piece of extra soft rubber to give maximum elastic strength and has been thoroughly tested for damping characteristics.

The size and extra softness of the rubber makes this mount well suited for the Compacts Microphone Types 4033, 4036 and 4037.


 DDS0016 Rubber Mount 16 mm (0.63 in), Extra Soft

The DDS0016 Rubber Mount is molded from a single piece of extra soft rubber to give maximum elastic strength. The mount has been thoroughly tested for damping characteristics. The size and extra softness of the rubber makes this mount well suited for the Compacts Microphone Types 4051, 4052 and 4053.



 DDS0019 Rubber Mount 19 mm (0.75 in), Extra Soft

The CSM4000 alias "The Radiator Mascot" is a shock mount specially designed for rubber suspension of Compact Microphones on standard microphone stands, the TB4000 Table Base or the MB4000 Magnet Base.

The recommended extra soft Rubber Mounts provides an efficient absorption of any vibrations, that might occur during use. It is fitted with one DDS0019 Rubber Mount for Ø 19 mm microphones as standard, but can also be fitted with Rubber Mounts for both Ø 11-13 mm and Ø 16 mm microphones. The robust plastic ring offers excellent protection of the microphone, if used for example on a drum kit.

The CSM4000 is fitted with a thread adapter, which allows usage on up to three of the most popular international standard threads used on microphone stands.



 DDS0030 Rubber Mount 27-32 mm (1.18 in), Medium Soft

The DDS0030 Rubber Mount is molded from a single piece of medium soft rubber to give maximum elastic strength when used with the more heavy microphone types with Ø27-32 mm housings (Not DPA Microphones). The mount has been thoroughly tested for damping characteristics.



 DDS0031 Rubber Mount 27-32 mm (1.18 in), Extra Soft
The DDS0031 Rubber Mount is molded from a single piece of extra soft rubber to give maximum elastic strength when used with the more light weighted microphone types with Ø27-32 mm housings (Not DPA Microphones). The mount has been thoroughly tested for damping characteristics.




 DDS0413 Rubber Mount 24 mm (1 in), Medium Soft
The DDS0413 Rubber Mount is molded from a single piece of medium soft rubber to give maximum elastic strength when used with the more heavy microphone types with Ø24 mm housings. The mount has been thoroughly tested for damping characteristics.




 DDS0731 Rubber Mount 19 mm (0.75 in), Medium Soft

The DDS0731 Rubber Mount is molded from a single piece of medium soft rubber to give maximum elastic strength when used with the Standard Microphones, Large Diaphragm Microphones or other microphone types with Ø19 mm housings. The mount has been thoroughly tested for damping characteristics.



 DMM0001 Miniature Clip
The DMM0001 is a flexible clip for mounting up to two Miniature Microphones on the chest of a speaker. The length of the clip ensures a stabile mounting even on thin clothes and the rubber piece inside the clip is for holding a short cable loop, which will increase the systems immunity to cable noises.
Miniature Microphones can be mounted by their cable or their housing.


 DMM0002-B Miniature Double Pin, Black

The DMM0002-B is a black holder for quick and easy mounting a Miniature Microphone on the chest of a speaker.

The double pin ensures maximum mounting stability and makes it possible to fit the microphone even on T-shirts and sweaters.
The DMM0002-B can hold up to two Miniature Microphones by their cables or one by the housing.



 DMM0002-W Miniature Double Pin, White

The DMM0002-W is a white holder for quick and easy mounting a Miniature Microphone on?a speaker.

The double pin ensures maximum mounting stability and makes it possible to fit the microphone even on T-shirts and sweaters.

The DMM0002-W can hold up to two Miniature Microphones by their cables or one by the housing.



 DMM0003-B Miniature Magnet, Black
The DMM0003-W is a white holder using a strong magnet for mounting a Miniature Microphone on a speaker.

The Magnet Mount is supplied together with a small iron tag on an elastic necklace for placing inside the clothes behind the magnet.

As the magnet is mounted on the microphone holder it is also possible to use the DMM0003-W on all other magnetic surfaces.

The DMM0003-W can hold up to two Miniature Microphones by their cables or one by the housing.


 DMM0003-W Miniature Magnet, White

The DMM0003-W is a white holder using a strong magnet for mounting a Miniature Microphone on?a speaker.

The Magnet Mount is supplied together with a small iron tag on an elastic necklace for placing inside the clothes behind the magnet.

As the magnet is mounted on the microphone holder it is also possible to use the DMM0003-W on all other magnetic surfaces.

The DMM0003-W can hold up to two Miniature Microphones by their cables or one by the housing.



 DMM0004-B Miniature Clip, Small, Black

The DMM0004 is a clip specially designed for quick and easy mounting of a DPA Miniature Microphone on the chest of a speaker.



 DMM0004-W Miniature Clip, Small, White

The DMM0004 is a clip specially designed for quick and easy mounting of a DPA Miniature Microphone on the chest of a speaker.



 DMM0005 Miniature Holder, Single Pin, 3 pcs.

The DMM0005 is a ultra-small single pin holder for mounting a Miniature Microphone on the chest of a speaker in a quick and easy way.

The pin has a lock which ensures maximum mounting stability. It is specially designed for usage on rather thick clothes like sweaters, sweat shirts and jackets.



 DMM0007 Universal Surface Mount, 5 pcs.

DMM0007 Universal Surface Mount is a soft rubber holder for Miniature Microphones on numerous instruments, using a special non-marking adhesive, allowing the microphone to be placed at virtually any location on the musical instrument.

This adhesive, while providing a firm location for microphone mounting, retains its ability to adhere through multiple uses. The holder is supplied in a box of 5 with 20 adhesive discs to extend the stick-on time.



 DMM0008-B Miniature Clip, Double Lock, Black

The DMM0008 is a dobble clip specially designed for quick and easy mounting of a DPA Miniature Microphone on the chest of a speaker. When mounting the microphone on the two holes, cable noise is attenuated dramaticly.



 DMM0008-W Miniature Clip, Double Lock, White

he DMM0008 is a clip with double lock specially designed for quick and easy mounting of a DPA Miniature Microphone on the chest of a speaker. When the microphone is mounted downwards it is possible to lock the cable in two places and make a natural loop.



 DMM0011-B Magnet Mount, Black

DMM0011-W is a very strong magnet holder that can hold up to two Miniature Microphones by their cables or one by the housing.

The holder is suited for everything magnetic, such as grand and up-right piano (in the frame) or drums with magnetic rims.



 DMM0011-W Magnet Mount, White

DMM0011-B is a very strong magnet holder that can hold up to two Miniature Microphones by their cables or one by the housing.

The holder is suited for everything magnetic, such as grand and up-right piano (in the frame) or drums with magnetic rims.



 DMM0014 Clip for 4080

The standard delivered single clip for the DPA 4080 Miniature Cardioid Microphone.

The unique mounting design around a ball-shaped fixation spot allows the directional microphone to easily be turned in all directions and the clip fits both left and right buttoned shirts.

To increase the system's immunity to cable noise, the DMM0014 features a short cable trail for securing the microphone cable.



 DMM0015 Double Clip for 4080

The DMM0015 is a flexible clip for mounting two DPA 4080 Miniature Cardioid Microphones on?a speaker offering optimum safety in terms of backup if one of the wireless channels should fail to function.

The 4080's rubber shock mount can easily be dismounted from its enclosed clip (DMM0014) and attached to one of the ball-shaped fixation spots on the DMM0015 Double Clip.

To increase the system's cable noise immunity, the DMM0015 features a short cable trail for securing each microphone cable.



 DMM0016 Magnet Mount for 4080

Adapter for use with DPA's series of Miniature Microphones. MicroDot to Mini-Jack



 DUA0513 Cable clamp for 4080, 5 pcs.

Cable clamp for 4080



 EXY4000 Extension for CXY/CXO4000

The EXY4000 Extension is intended for usage together with Compact stereo holders (i.e. CXY4000) if rubber suspension is needed.
It has a 19 mm outside diameter and will fit directly into the UA0897 Shock Mount, the RSM4000 Shock Mount for Windjammer or the WSM4000 WINDPAC Shock Mount.



 GC4099 Guitar Clip




 GM4000 Gooseneck Mount for 4021/22/23/26/27/28

The GM4000 is specially designed for mounting the studio quality Compact Microphones directly inside a piano.

It has a brass gooseneck, which allows the compact microphone to be adjusted in any direction. A 3/8-inch thread allows it to be mounted on the Magnet Base MB4000 for placement on metal surfaces.

The GM4000 can also be fitted with 12mm and 16mm rubber mounts, available for use with other microphones in the Compact series.



 GM4000 Gooseneck Mount for 4021/22/23/26/27/28

The GM4000 is specially designed for mounting the studio quality Compact Microphones directly inside a piano.

It has a brass gooseneck, which allows the compact microphone to be adjusted in any direction. A 3/8-inch thread allows it to be mounted on the Magnet Base MB4000 for placement on metal surfaces.

The GM4000 can also be fitted with 12mm and 16mm rubber mounts, available for use with other microphones in the Compact series.



 MB4000 Magnet Base

The Magnet Base MB4000 uses an extremely powerful magnet to give optimal grip on the surface where the base is intended to be used.

Even quite heavy microphone holders will be kept in a safe position by the MB4000 in spite of its insignificant size. It has a rubber coating for maximum protection of the surface of the instrument on which it is to be used.



 MHS6001 Microphone Holder for Strings

MHS6001 is a soft piece of rubber designed for mounting a DPA Miniature microphone on a violin, viola, cello or double bass. The holder is to be mounted between the tailpiece and the bridge and can be placed either above or below the strings, depending on the desired sound color and sound level.

In general, mounting the microphone below the strings is especially good for use in live applications. It allows for greater gain before feedback and less leakage from nearby sound sources. The sound will reveal the close-mic position to the wood resulting in a darker response. Mounting the microphone above the strings is especially good for solo performance or in the studio. The sound will be more open and clear, revealing the actual sound of the instrument and the room. The miniature microphone is secured by its cable in a little clip, while the holder itself has a firm grip on two strings of the instrument with small hooks.



 MHS6005 Microphone Holder for Strings, 5 pcs

MHS6005 is a pack of 5 pcs of soft rubber providing attachment of a DPA Miniature microphone on violin, viola, cello or double bass. The holders are to be mounted between the tailpiece and the bridge and can be turned upwards or downwards so that the microphone will be placed either over or under the strings after desired sound colour taste or sound level. The miniature microphone is secured by its cable in a little clip, while the holder itself has a firm grip on two strings of the instrument with small hooks.



 PC4099 Magnet Mount for Piano

Magent mount for piano.



 SM4000 Suspension Mount

The Suspension Mount SM4000 is a simple and flexible mount for the Compact Cardioid Microphones Types 4021, 4022 and 4023 plus the Compact Omnidirectional Microphone Types 4051, 4052 and 4053.

It allows the microphone to hang from its cable and then be oriented in any direction desired by bending the holder. The mount is delivered as a standard accessory with all the microphone types mentioned above.



 SM4080 Shock Mount for 4080 Lavalier

Shock Mount for 4080 Miniature Cardioid Microphone, Lavalier



 STC4099 Sax/Trumpet Clip




 TSM4000 Table Shock Mount

The TSM4000 Table Shock Mount is specially designed for fixed microphone installations in tables or podiums in broadcast studios or meeting rooms and provides perfect shock absorbtion for the installed microphone.
TSM4000 is recommended for usage with special short versions of the Compact Active Poles from the Flamingo Series and the Compact Microphone types with Lemo connectors. It is mounted from under the table plate, where a hole needs to be drilled to allow the gooseneck and the microphone to be installed. The rough edges of the drilled hole in the table plate is covered with the enclosed plastic cover for a 25 mm hole.



 UA0639 Microphone Clip

The UA0639 is of a traditional design, but with additional modifications, that ensure a tighter and firmer grip on the microphone, while still enabling it to be secured and removed repeatedly with ease. The clip is ideal for all Standard Microphones and other microphones with Ø19 mm housings.



 UA0897 Shock Mount

The UA0897 Shock Mount is designed for use in environments where vibration levels are unusually high. Its ultra-compact, robust design significantly reduces the amount of vibration, that reaches the microphone without having adverse acoustical effects. This shock mount was designed using modern vibration measuring techniques, using Bruel & Kjær's world famous vibration test equipment. Unlike other shock mounts, the vibration reduction is clearly specified. It can be used stand mounted in the studio, or in hand-held boom applications.

Use extra soft Rubber Mounts for the more lightweight microphones and medium soft for the heavier types.
The UA0897 is supplied as standard with the DDS0731 Rubber Mounts for 19 mm microphones. The UA0897 is fitted with a thread adapter, which allows usage on up to three of the most popular international standard threads used on microphone stands.



 UA0961 Microphone Holder

The UA0961 Microphone Holder is of a unique design, which ensures, that the microphone is held securely at all times. It is best suited for use in permanent or semi-permanent set-ups, where the stability of the microphone is of optimum importance. The UA0961 fits all DPA's Large Diaphragm and Standard Microphones plus other microphones with Ø19 mm housings.



 UA0962 Microphone Holder for Integrated Cable in D3/S5

Microphone Holder for integrated cable in D3/S5



 UC4099 Universal Clip

Clip with hook-and-loop fastener to mount on various instruments.



 VC4099 Violin Clip




 VH4000 Microphone Holder for Violin/Bass

The VH4000 is specially designed for mounting the studio quality Compact Microphones directly on violin, viola or bass, bringing the microphone directly to the sweet spot of the instrument in a quick and straight forward way.

It clips over the strings behind the bridge of the instrument and has multiple adjustment possibilities for the optimal microphone placement. The VH4000 offers an effective rubber suspension of the microphone.