마이크프리CORE®

CORE®

REFERENCE CHANNEL STRIP


 

Manley Lab이 존경받는 레코딩 스튜디오 장비를 25년동안 생산하는 Manley Lab은 이 혈통으로 부터 Core 기술을 뽑아냈습니다. Manley CORE는 2014년에 Manley의 가장 히트친 제품과 신선한 기술이 결합된 혁신적인  채널 스트립인 CORE 제품을 출시하였습니다.

현저하게 직관적인 전면 패널은 음악적이고 관용적인 회로가 결합되어 음악가가 바다에서 길을 잃지 않고 자신의 연주에 집중할 수 있도록 합니다. 

Manley의 경험과 업계 최고의 녹음 엔지니어 및 음악가와의 통찰력은 CORE에서 최고조에 달합니다. 이 가격에는 CORE보다 더 높은 헤드 룸 또는 매혹적인 사운드를 가진 다른 채널 스트립이 없습니다. Manley CORE는 견딜 수 있도록 탱크처럼 수공품으로 만든 예술작품입니다. 

신호는 무 금속 캔에 니켈 라미네이션이있는 유명한 손 권선 MANLEY IRON® 입력 변압기를 통해 입력됩니다. 튜브 증폭 단계는 VOXBOX® 및 Manley Dual Mono & Mono Microphone Preamplifiers에서 볼 수있는 유명한 Class-A 회로 토폴로지의 최신 구현입니다. 이 all-triode 진공관 회로는 규정된 300 볼트 B + 전원 공급 장치를 사용하여 거대한 헤드 룸과 끊임없는 출력 드라이브 기능을 제공합니다.



DETAILS


 
 
mcore-input-nolights.png

FRONT PANEL CONTROLS + DIRECT INPUT

48V Phantom power switch

120Hz High Pass Filter switch

Phase Invert switch

Input Attenuator (Variable Pad)

Mic Pre Selectable Gain 40dB or 60dB

Line Amp Selectable Gain 20dB or 40dB

DIRECT IN: Similar to the DI in the Manley SLAM!®, this all-discrete solid-state circuit with 10 Meg Ohm input impedance is perfect for guitars, bass, keyboards, etc.

mcore-elop.png

COMPRESSOR

Featuring our successful ELOP® technology also found in our famous Manley VOXBOX®

Compressor is uniquely before the Mic Preamp making it virtually impossible to clip

Ratio 3:1

Continuously variable Attack, Release, and Threshold controls

Silent Bypass switch

mcore-eq-2.png

EQUALIZER

Low and High Baxandall Shelves (80Hz and 12kHz) with ±12dB range

Sweepable Midrange Bell EQ (100Hz – 1kHz) or (1kHz – 10kHz) with ±10dB range

LIMITER

Fast attack FET “brickwall” limiter

Continuously Variable Threshold and Release controls

Peak Limit LED indicator

10dB range output gain control

METER

Large illuminated analog display

3-way meter-select switch shows Compressor Gain Reduction, Micpre Output Level, and Main Output audio levels.

core-rearpanel.png

INPUTS & OUTPUTS

Balanced XLR Mic Input

Balanced XLR Line Input

Front Panel Direct Instrument 1/4" Input

Insert point between Mic Preamp and EQ/Limiter via ¼” TRS jack

Balanced XLR Direct Output (after Preamp/Compressor section)

Balanced XLR Main Output

Deluxe CNC-machined 1/4" thick faceplate with inlaid laser-engraved inserts adorn the rigid 2U steel chassis – all locally sourced in Southern California



SPECIFICATIONS

 
  • ALL-TUBE preamplifier audio path using 1 x 12AX7 for gain and 1 x 6922 White Follower
  • Balanced Transformer Coupled XLR Microphone Input Impedance: 1200 Ohms
  • Balanced XLR Line Input Impedance: 10 kOhms
  • Unbalanced 1/4" Direct Input Impedance: 10 Meg Ohm
  • Hi-current drive Direct XLR output Impedance: 50 Ohms
  • Silent conductive plastic INPUT attenuator
  • Microphone preamp high pass filter starting at 120Hz with a 6dB/8va slope
  • Compressor Maximum GAIN REDUCTION: 16 dB
  • Compressor ATTACK time: 60ms slowest CCW, 30ms at 12:00, 5ms fastest CW for 6dB compression
  • Compressor RELEASE time: 1.5s slowest CCW, 1s at 12:00, 100ms fastest CW from 6dB compression

 

  • Maximum Input Mic input (Low Gain Setting): -5 dBu or 435mV RMS @ 0.5% THD
  • Maximum Input Mic input (High Gain Setting): -25 dBu or 44 mV RMS @ 0.5% THD
  • Maximum Input Line input (Low Gain Setting): +13 dBu or 3.5V RMS @ 0.5% THD
  • Maximum Input Line input (High Gain Setting): -8 dBu or 300mV RMS @ 0.5% THD
  • Maximum Input Direct input (Low Gain Setting): +24 dBu or 12V RMS @ 0.5% THD
  • Maximum Input Direct input (High Gain Setting): +17 dBu or 5.5V RMS @ 0.5% THD
  • Maximum Input Insert return: +20 dBu or 7.8V RMS @ 0.5% THD
  • Maximum Preamp Output (Insert Send): +35 dBu or 43V RMS @ 0.5% THD
  • Maximum Preamp Output (Insert Send): +22 dBu into 600 Ohms
  • Maximum Main Output: +20 dBu
 
  • Insert Send output impedance: 50 Ohms
  • Insert Return input impedance: 13 kOhms
  • Main Output Impedance: 50 Ohms
  • Direct Output Headroom (referenced to +4 dBv): 31 dB
  • Main Output Headroom (referenced to +4 dBv): 16 dB
  • Dynamic Range: >90 dB
  • Frequency Response: 10 Hz to 20 kHz ±0.5 dB

 

  • Large LED illuminated VU METER
  • Meters switch to read Direct Output (1) from preamp, Output (2) from Main Out, or Compressor Gain Reduction
  • THD & Noise (1kHz @ +4 dBm): 0.02% at Low Gain setting
  • Noise Floor (Gain set to minimum): -70 dB wideband typical
  • Gain via Microphone Input: 40 or 60 dB
  • Gain via Line Input: 20 or 40dB
  • Maximum Gain of EQ & Limiter section: 10 dB
  • AUTOMUTE warmup delay: 30 Seconds

 

  • Power consumption: 35 watts
  • Operating mains voltage: 90 to 254 VAC (internal universal supply)
  • Mains Voltage Frequency: 50-60Hz
  • Dimensions: 19" x 3 1/2" x 7" (occupies 2u)
  • Unit Weight: 8.3 lbs.
  • Shipping weight: 11.5 lbs.